Yes, we
have a big inventory of colors,
please make sure you make a note
at your payment , describing
you order and specific color
you want, if this note is not
there we can not process you
order correctly.
Price
may vary.
Orders would take
more than normally time to be
process depending supplies stock.
more info , please send us an
email.
Many
colors are Digitally created
(print) others are plain die-cut
vinyl, others are special materials.
vinyl
decals are 5-7 years durability
on outdoors
print
decals are 2-3 years durability
on outdoors.UV protected ink. solvent
printing.
We can make any
reflective color, Solvent print
method.
High
Gloss Intermediate Calendered Vinyl
3 MIL • 5 YEAR
These PVC Films are HIGH
GLOSS with excellent stability. They are soft
in nature and will conform to curved or flat
surfaces, which makes them superior for die
cutting and flexible range of films. These
films have a very high tack adhesive specifically
formulated for banner graphics and lettering.
They have a long-term FIVE (5) YEAR OUTDOOR
DURABILITY for outdoor signage. APPLICATION
WITH WATER ONLY. NOT TO BE USED WITH SOLVENT
BASED APPLICATION FLUIDS.
CONSTRUCTION
Face Film
3 mil high gloss, intermediate calendered vinyl
film
Adhesive
Release
Aggressive, acrylic, permanent, pressure-sensitive. Not to be used with solvent
based application fluids
Liner
78# (White) Bleached Kraft
PHYSICAL
PROPERTIES
Outdoor
Durability
5 years, mid-continental U.S., vertical.
Minimum Surface/Ambient Air Application
Temperature
+ 35° F.
Application Surface
Interior and exterior markings/decals requiring low
cost and flexible products. e.g. original equipment
markings.
Service Temperature Range
50°F. to +150°F. — Reasonable range of temperatures,
which would be expected under normal environmental
time and temperature conditions.
Opacity
Normal
Typical Film Caliper (w/adhesive)
3.8 – 4.2 mils
Chemical
Resistance
Good for most petroleum solvents and lower aliphatic
alcohols. For ultimate solvent resistance, edge sealing
is recommended.
Water Resistance
Excellent: Test piece aged 24 hrs. after application
to stainless steel panel before testing. Not affected
when immersed in 70°F water for seven days.
NOTE:
Always pretest
your specific
substrates
prior to
actual application.
Adhesion
50 oz/in.
Shelf Life
2 years when stored under conditions of 70°F
and 50% relative humidity.
The following information on
physical and chemical characteristics is based
upon tests believed to be reliable. The values
are intended only as a source of information.
They are given without guarantee and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the
suitability of this material for his/her specific
purpose. (Data represents averages and is not
intended for use as a specification.)
